Hệ Thống Nhúng

Course categoryKHOA SƯ PHẠM - KỸ SƯ THỰC HÀNH

An embedded system is a device or product which contains one or more tiny computers hidden inside it. Hệ thống nhúng là một thiết bị hoặc một sản phẩm bao gồm một hoặc nhiều máy tính siêu nhỏ ẩn bên trong nó.

This ‘hidden computer’, usually a microcontroller, is used to control the device and give it added ‘intelligence’. “Máy tính ẩn” ở đây thường là bộ vi xử lý, nó dùng để điều khiển thiết bị và được cho “trí thông minh” (Nghĩa là được lập trình để xử lý một cách nhanh chóng và hiệu quả).

Embedded systems are a key aspect of modern engineering and are applied in areas as diverse as automotive, medical, and industrial, and in the home and office. Hệ thống nhúng là một chìa khóa của kĩ thuật hiện đại và được ứng dụng trong các lĩnh vực khác nhau như tự động, y học và trong công nghiệp, trong nhà và văn phòng.

In many cases, embedded systems are linked together in networks. Trong rất nhiều trường hợp, hệ thống nhúng được liên kết với nhau thành một mạng lưới.

Embedded systems are the basis of a new wave of engineering design and practice, notably in machine-to machine communication and in the Internet of Things. Hệ thống nhúng là nền tảng của một làn sóng thiết kế kĩ thuật và thực hành, đặc biệt là trong giao tiếp giữa các máy móc và trong mối liên kết giữa mọi thứ.

This unit builds on introductory knowledge students have already gained in electronic circuits. Môn học này được xây dựng dựa trên nhựng kiến thức đã có về mạch điện của sinh viên.

It develops their knowledge of computer hardware, focusing on the small, low-cost type of computer (i.e. a microcontroller), usually used in embedded systems. Môn học phát triển kiến thức cho sinh viên về phần cứng máy tính, tập trung vào loại máy tính nhỏ, giá thành thấp (ví dụ như bộ vi xử lí).

It then develops skill in devising circuits which operate external to the microcontroller and interface with it; generally, these relate to sensors, actuators, human interface or data transfer. Phát triển kĩ năng trong các mạch hoạt động mở rộng với bộ vi xử lý và giao tiếp với chúng, nhìn chung là trong các mối quan hệ với cảm biến, động cơ, giao diện người dùng hoặc truyền tải dữ liệu.

In parallel with this, students will be developing programming skills, writing programmers. Song song với đó, sinh viên sẽ phát triển kĩ năng lập trình, viết chương trình.

TOÁN KỸ THUẬT NÂNG CAO

Course categoryKHOA SƯ PHẠM - KỸ SƯ THỰC HÀNH

TOÁN KỸ THUẬT NÂNG CAO CHO LỚP ĐCN

123

Course categoryBộ môn Kỹ thuật điện tử công nghiệp

Bài VD

Course categoryBộ môn Kỹ thuật điện tử công nghiệp

Ví dụ

MÔ HÌNH HÓA VÀ MÔ PHỎNG TRONG KỸ THUẬT

Course categoryBộ môn Kỹ thuật điện tử công nghiệp

Unit T7: Modelling and Simulation for Engineers
Unit code: F/503/7343
QCF level: 6
Credit value: 15

Aim
This unit gives learners the opportunity to develop their understanding of Ordinary Differential Equations and Partial Differential Equations (ODEs and PDEs). Learners will gain skills in algorithm design and programming techniques in MATLAB /Simulink; for the modelling, simulation and analysis of dynamic engineering systems.


NGUYÊN LÝ ĐIỆN NÂNG CAO copy 1

Course categoryBộ môn Kỹ thuật điện tử công nghiệp

NGUYEN-LY-DIEN-NANG-CAO

HỆ THỐNG NHÚNG copy 1

Course categoryBộ môn Kỹ thuật điện tử công nghiệp

Bài 10: Điều khiển TBĐ từ xa dùng MQTT

Mục tiêu

Sau k hi học bài này

 Sinh viên hiểu được cơ  bản vể MQTT

Ứng dụng  điều khiển ON/OFF thiết bị điện


Nguyên Lý Điện Nâng Cao

Course categoryBộ môn Kỹ thuật điện tử công nghiệp

In this unit learners will develop their understanding of electrostatic and electromagnetic fields.

Tóm tắt bài

Learning outcomes
On successful completion of
this unit a learner will:

Assessment criteria for pass
The learner can:

LO1 Be able to analyse
electrostatic and
electromagnetic fields

1.1 apply field methods to establish analytically derived
values of capacitance and inductance
1.2 produce field plots and deduce approximate
capacitance values

1.1 áp dụng các phương pháp trường để thiết lập dẫn xuất phân tích giá trị của điện dung và độ tự cảm

1.2 sản xuất các lĩnh vực và suy ra gần đúng

giá trị điện dung

LO2 Be able to design and
evaluate filters

2.1 design a passive low-pass and a high-pass filter
2.2 analyse a second order active filter
2.3 perform a frequency response test on a practical filter
and compare the results with a computer simulation

2.1 thiết kế bộ lọc thông thấp thụ động và bộ lọc thông cao

2.2 phân tích bộ lọc hoạt động thứ hai

2.3 thực hiện kiểm tra đáp ứng tần số trên bộ lọc thực tế

và so sánh kết quả với một mô phỏng máy tính

LO3 Understand transmission lines

3.1 calculate secondary transmission line parameters
3.2 analyse correctly terminated lines
3.3 assess reflections on transmission lines
3.4 explain the use of quarter wavelength matching stubs

3.1 tính toán các tham số đường truyền thứ cấp

3.2 phân tích các dòng kết thúc chính xác

3.3 đánh giá phản xạ trên đường truyền

3.4 giải thích việc sử dụng các cuống bước sóng quý

LO4 Be able to apply topology to circuit analysis

4.1 carryout a topological analysis of a circuit
4.2 perform mesh/nodal analysis

4.1 tiến hành phân tích tô pô

4.2 thực hiện phân tích lưới / nút


Quản lý dự án - Hàn KSTH K04

Course categoryBộ môn Công Nghệ Kỹ Thuật Cơ Khí Hàn

CẮT GỌT KIM LOẠI CNC

Course categoryBộ môn Công Nghệ Kỹ Thuật Chế Tạo Cơ Khí

PHAY

Course categoryBộ môn Công Nghệ Kỹ Thuật Chế Tạo Cơ Khí

ABC

Course categoryBộ môn Công Nghệ Kỹ Thuật Chế Tạo Cơ Khí